Little Joe-II Pages

QTV A-001 A-002 A-003 A-004 PA-1 PA-2

Scale Main

Little Joe Main

Article

Drawings

Photos #1

Photos #2

Reports

George's Models

Tom's Models

Kits

Little Joe II Drawings by George Gassaway & Tom Beach The following Little Joe-II Drawings were mostly done by George. Some portions were done by Tom. The Pad Drawings were entirely Tom's. Most of these drawings were in the May/June and July/August 1991 issues of American Spacemodeling Magazine (The NAR's magazine name before Sport Rocketry).

Navigation links for this page: Whole Vehicle Drawings Combined Drawings Little Joe-II Main Body Fins, Fairings, and Configuration Details Apollo BPC/LES, CM, and SM Launch Pad

Whole VehicleDrawings

QTV at 1/100 scale

A-001 at 1/100 scale

A-002 at 1/100 scale

A-003 at 1/100 scale

A-004 at 1/100 scale

12-50 Series (QTV, A-001) at 1/150 Above at 1/100 scale

12-51 Series (A-004, A-003, A-002) at 1/150 Above at 1/100 scale

A-004 at 1/50 scale

A-004 rotated 45 degrees (1/50)

A-004 at 1/32 scale

Back to top

CombinedDrawings

A-001 at 1/100 scale

A-002 at 1/100 scale

1/39.5 Scale 1:1 Workshop Drawing for FAI Scale Data Pack This is a LARGE GIF, download as a File

Back to top

Little Joe-IIMain Body

QTV/A-001         A-002         A-003/A-004 Three Body types used, at 1/50 scale

Original General Dynamics/Convair Drawing This a very large GIF, download it as a File

Back to top

Fins, Fairings,and Configuration Details

12-51 Series Fin at 1/32 scale

Chart of Configuration Details for all Five Missions

Back to top

Apollo BPC/LES ,CM, and SM

BPC/LES

Service Modules A-001 thru A-004 (for QTV see 12-50 series drawing)

BPC Details & Roll Pattern

Additional BPC & CM Details

Back to top

Launch Pad -By Tom Beach unlessotherwise noted

Pad by Tom Beach, Little Joe by George Gassaway

Pad Base Assembly

Pad Platform

Pad Tower

Pad Gratings Above at 1/10 Scale